CData Sync

Share product questions and get support for CData Sync

  • 59 Topics
  • 106 Replies

59 Topics

C
cdata_userApprentice
asked in CData Sync

Replicating data from Netsuite to Snowflake using cData is failing

I am currently using cData Sync to replicate data from NetSuite Tables to Snowflake. However, I am encountering issues with two critical tasks within my job, which consists of 24 tasks in total.The error messages for the failing tasks are as follows: 1.[0] [500] Could not execute the specified command: Can not view record 2.[0] [500] Could not execute the specified command: Failed to cache row [5247] Can not view record StackTrace: at aso230l.nT.Next() at aso230l.mH.Next() at aso230l.mb.Next() at aso230l.mY.Next() at aso230l.mQ.Next() at aso230l.Kz.q(DbCommand , DataTable , IResultSet , ColumnInfo[] , Int32[] , jsb ) These errors are hindering the successful completion of my data replication process, and it is critical for my project that these tasks run smoothly.Please advise .

1
Ethem Q
9 hours ago
S
Steve RApprentice
asked in CData Sync

CData Sync Oracle CDC using logminer fails

I am having an issue with my sync installation. I am able to successfully start logminer on the oracle instance and query the results of that logminer session.However, when I run a CDC job from Sync, it will complete the initial data load successfully but then fail on the incremental loads after the initial one with the below error:logminer failed to start If I have it delete the table ot truncate the data then it reloads just fine. It just won’t start logminer to run the CDC loads.Has anyone run into this issue or found a way to resolve this so I can get CDC loads from oracle to sql server working correctly? 

1
Ankit Singh
1 day ago
Ankit Singh
Ankit SinghEmployee
posted in CData Sync

Replicate Workday WQL Data to Snowflake using Workday Prompts (without errors)

Replicating Workday Data: The ChallengesReplicating Workday HCM and Financials data can be a challenging task in itself, especially when the Workday APIs are so vast, support a variety of data models, and offer different types of authentication mechanisms.With CData Workday connectivity solutions, we simplify the complexities of the backend APIs and offer you a relational view of all your Workday that can be queried using SQL. CData Workday connectors support a variety of Workday connections through:Workday SOAP APIs Workday REST APIs Workday RaaS (Reports-as-a-Service) Workday WQLTo learn more about the seamless Workday connectivity, CData offers, please refer here: https://cdn.cdata.com/help/ASK/sync/Workday-Source.html#connect-to-workday.Powerful Querying through Workday WQLThe Workday WQL service enables high-performance querying of Workday data. Each CData Workday connectivity solution has a built-in SQL Engine that is optimized to work with Workday WQL. As such, CData solutions c

1
Ankit Singh
1 day ago
Aleksander P
Aleksander PEmployee
posted in CData Sync

Seamless monitoring between CData Sync and Datadog

Given the increasing reliance of companies on their IT infrastructure to maintain competitiveness and fulfill customer needs, effectively managing and monitoring their IT environments can pose a significant challenge in the absence of appropriate tools.Datadog is a cloud-based monitoring and analytics platform that helps organizations gain real-time visibility into their IT infrastructure.This article consists of detailed steps related to enablement of the integration between CData Sync and Datadog.NOTE: This article can be taken into account for other CData applications that auto-generate logfiles from their operational activities (i.e. “CData Arc”, “CData Connect Server”) Step 1: Install the latest version of Datadog Agent (assuming that you already have a Datadog account)On the UI of your Datadog’s instance, hover into “Integrations” and then click “Agent”, in order to access the page that will help you with the installation of the agent.Once you are on the “Agent” page, select your

2
Aleksander P
15 days ago
Jaclyn
JaclynEmployee
posted in CData Sync

🚀 Exciting News from CData! 🚀 Data Sync Q1 2024 Release Highlights

We're thrilled to announce the latest enhancements to CData Sync, now with even more powerful features to supercharge your data integration and management:  🌐 Sync Cloud - Our renowned Sync product, previously only available on-premise, has now ascended to the cloud! Managed directly by us and unlimited volume allow... experience the full power and scalability of cloud hosting.  💾 S3: Enhanced Incremental Replication - We've significantly enhanced our S3 Incremental Replication Load from Folder feature by fully supporting directory paths in S3. This update allows for more precise and flexible data management, enabling you to efficiently manage and synchronize your data across even the most complex folder structures.  🔄 CDC from Dynamics 365 - Keep your data fresh with our new Change Data Capture (CDC) support for Dynamics 365. Capture and sync changes in real-time, ensuring your data remains current and accurate.  📚 Full Feature Documentation - For a comprehensive understanding

0
Jaclyn
17 days ago
J
JTapioApprentice
asked in CData Sync

CData Sync and Windows Event viewer

My CData Sync servers are running on Azure. I’d like to use Azure Monitor Agent to monitor if CData Sync service is in stopped state. Usually Windows Service monitoring can be queried from Windows System logs finding Event ID 7036. CData Sync seem not to write anything to System Log (or I just not find it). Where should I try to find information if service is stopped?

2
E
23 days ago
J
JTapioApprentice
asked in CData Sync

Task data source settings grayed out in the Sync version 23.4.8843.0

I’ve updated our test environment to latest version 23.4.8843.0 and I noticed that when I try to configure data source settings, I can’t and I get information “Settings are not editable”. Same issue with new tasks and previously created tasks. I can however make settings directly to query-tab and it will work ok. Our production environment is version 23.3.8700.0 and that issue is not there. Data source which I’m using is ElasticSearch

3
Ethem Q
1 month ago
N
Newbie CdataApprentice
asked in CData Sync

How to set Additional Job Options via API Call

We are currently using cdata version .NET Edition - 23.3.8700.0 in our organization and we create jobs through API call. Through API call we are able to create the JOB fine, but we are unable to set StoresUppercaseIdentifiers=true Additional Options property.Any help on this topic is greatly appreciated.  

4
N
1 month ago
A
abhi_quadwaveApprentice
asked in CData Sync

CDC in Cdata Sync creates new record in Destination Table for a record update in Source table

[META|Schema] Skip the drop column operation for column [_cdatasync_deleted]. Can anyone help me understand this issue please. As in the destination table there is a column  _cdatasync_deleted which is being set to null for this new row inserted(Which was supposed to be a UPDATE instead of INSERT in first place)

1
E
1 month ago
Jaclyn
JaclynEmployee
posted in CData Sync

CData Sync Q1-2024 Release

📢 New Year, New Features! CData Sync Q1 2024 Release Highlights   Kickstarting 2024 with a bang, we're excited to announce the latest features in the Q1 2024 CData Sync release! Check out what's new:  API Connector Query Slicer - Elevate your API interactions! This innovative feature allows more flexible and efficient API call executions. Ideal for all users, making API integrations smoother than ever.  Reverse ETL - Big news for Salesforce users! Now push data directly into your Salesforce instance, integrating your database insights seamlessly. A major leap forward in CRM data management.  Enhanced Usability Features - Based on your valuable feedback, we've improved usability aspects across our platform, ensuring an even more intuitive and user-friendly experience.  📖 Discover More in Our Q1-2024 Sync Release Blog - Dive into the details of these exciting updates in our latest blog post.  🎥 Visual Learner? Watch our tutorials on the new API Connector Query Slicer and Salesforc

2
P
1 month ago
C
CJIWApprentice
asked in CData Sync

Using Sync pre events to run sync loops

Hello!I know that I can define an out environment variable in pre-job event and use that in the task replication query (documented here and here excellently).I’m probably stretching here but can I define that out-variable to read from a file or any other source and then run the sync task for ALL values of that variable? Kind of a loop? Thanks in advance for you answers!

0
C
1 month ago
C
CharleyGApprentice
asked in CData Sync

Exception happened: Failed to start database

Exception happened:Failed to start database 'C:\ProgramData\CData\sync\db\cdata_sync' with class loader WebAppClassLoader{CData Sync}@20ce78ec, see the next exception for details.ServletPath: /login.rst ContextPath:  

2
C
2 months ago
A
aniruddhmaitraApprentice
asked in CData Sync

Customized Query throwing ambigious column error

 Hey! I have written a query in CData Sync to load rows from TransactionAccountingLine only for a date range, Feb 2024.REPLICATE [TransactionAccountingLine]SELECT tranacc.* FROM [TransactionAccountingLine] tranaccLEFT JOIN [transaction] tranON tranacc.transaction = tran.idWHERE tran.trandate between '2024-02-01' and '2024-02-29'Upon running this query, I am getting the error, [0] Column 'lastmodifieddate' is ambiguous. But I should not be getting this error since  I am selecting all the columns only from the TransactionAccountingLine table, where there is only one lastmodifieddate.Please help me with this issue.

3
D
2 months ago
C
CharleyGApprentice
asked in CData Sync

After upgrading CData Sync my Aha connector is not working anymore

Hi Team, Script manager is not registered for schema 'Aha' check whether the scheme is valid  I’m getting this error while trying to save and test the Aha connector Regards,Charitha

3
C
2 months ago
S
siriusApprentice
asked in CData Sync

All the transaction lineitems not loading in Netsuite suiteql

Hey tribe,I am running into a major problem while using Cdata sync to load tables through suiteql. For transactions table as an example, Many line items are not loading for a particular date range even though I made the relevant configuration and added the filters in my query.Sometimes I have to specifically type the tranid and load the same to get those lineitems. Doing this over and over again has become tiresome and is taking away the automated nature of the Fact tables we’ve built surrounding this. Is there something we can do to resolve this? Like adjusting the batch size or something? Looking out for your help :)

3
Ethem Q
3 months ago
S
srchuApprentice
asked in CData Sync

Download Oracle connector into cdatasync application

I am trying to download the Oracle db connector. in CDataSync application. I am getting the following error message An error occurred during downloading connector [Oracle]: Download provider error: Cannot conclude ssl handshake. Cause: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target. Any one tried downloading and configuring Source Oracle DB?

2
S
3 months ago
D
DougN NouriaInfluencer
asked in CData Sync

Source CSV file attributes as columns

I have 3 different CSV files to load each week, and they always have the same filename.I set up a “Sync All” job to read these files and load them into my destination.However, I would like to pass the files’ creation dates or modify dates, as columns into the destination target table.  Is this possible to do? 

3
J
3 months ago
N
Newbie CdataApprentice
asked in CData Sync

JIRA Worklog Table Timeout

Trying to bring JIRA data onto snowflake using CData. All the tables loaded successfully except Worklog. The worklog table failed with below error. [0] [500] Could not execute the specified command: Failed to cache row [3652696] Invalid HTTP response! Timeout.. StackTrace: at aso230l.nT.Next() at aso230l.mH.Next() at aso230l.mb.Next() at aso230l.mY.Next() at aso230l.mQ.Next() at aso230l.Kz.q(DbCommand , DataTable , IResultSet , ColumnInfo[] , Int32[] , jsb ) Any help on this topic is greatly appreciated.

1
A
3 months ago
A
aniruddhmaitraApprentice
asked in CData Sync

transactionStatus table not loading CData Sync

Hi!I am working with a client who uses NetSuite ERP. We are trying to get Sales reports for them, which we are doing by using the transaction table from SuiteQL schema.We also need the transactions’ status, for which we need the transactionStatus table to load through Sync. On doing so, I am getting the following error :“[0] [INVALID_PARAMETER] Invalid search query. Detailed unprocessed description follows. Search error occurred: Record 'transactionStatus' was not found. Bad Request.” Please help me load this table.​​​​​​​

2
A
3 months ago
D
DougN NouriaInfluencer
asked in CData Sync

Sync pre/post Events - reuse existing db Connection info

You can use post-job Events to run some arbitrary SQL (like a stored procedure) at the end of your Job.The documentation says you have to make your own connection, as below.  But I’d really rather not embed cleartext credentials in multiple jobs.  Is there a way to specify a CData connection (which we’ve already established at this point), in the Event?What I’d really like is the ability to run arbitrary SQL commands against the target table, after each Task completes, not just at the end of the Job.  Seems like this could be a parameter that we supply as we define each Task.<api:set attr="db.driver" value="System.Data.SqlClient"/> <api:set attr="db.conn" value="Data Source=sqlserver;Initial Catalog=Test;User ID=user;Password=pass;"/> <api:set attr="db.query">INSERT INTO MyLog (JobName, RunDate, Results) VALUES ('[_input.JobName]', '[null | now()]', '[_input.JobStatus]')</api:set>

2
Ankit Singh
4 months ago
J
joshphillipssrApprentice
asked in CData Sync

Workday WQL Error

Using CData Sync Cross Platform with Workday WQL connection. Some queries work successfully, but a bunch fail with this message:[0] Received error from Workday: Invalid WQL query: !**! This error occurred during a request to calculate the field !**!, for instance !**!.. Cause: com.workday.exceptions.ExternalFieldException: The Increment or Decrement Date field, !**!, has encountered a blank date..  Thanks.

1
Ethem Q
4 months ago
J
joshphillipssrApprentice
asked in CData Sync

Min.io S3 Bucket

Trying to connect to Min.io on-prem S3 bucket. Confirmed API is working:  However, I don’t know how to point to https://nas2.piorl.us:9000/bucket1/ in CDataSync Cross-Platform Edition. I’ve tried defining the full path in the Bucket field as well as “Path” in advanced options, but neither want to work. There is a reference to a “Custom URL” field in the advanced connection properties, but I can’t find the variable anywhere:  Thanks.

6
Ethem Q
4 months ago
R
RahmanfpApprentice
asked in CData Sync

Failed to use backup setting

Hi, So I have a system with CDataSync to sync my data from SQL Server to Azure Synapse with below detail: Old System:CDataSync Version: 22.0.8342.0CData AzureSynapse Provider Version: 22.0.8326.0 New System:CDataSync Version: 23.3.8704.0CData AzureSynapse (23.0.8616.0) I backup the old configuration and restore it to new configuration. However, it keeps getting an error like this Error: The SQL Error Number is 103010, State is 1, Severity is 16, Error is 'Parse error at line: 1, column: 126: Incorrect syntax near '.'.', Server name is server1, Line number is 1. The Token Type is 170. I found that the task is successful when I use this conditions:I dont use a new scheme for the destination, but I checked the Drop Table/Truncate Table I use a new scheme, but I unchecked the Drop Table/Truncate TableIs there a new query or options that changed in the new version? What can I do to fix the error? Thank you

1
Ankit Singh
5 months ago
R
RajeshApprentice
asked in CData Sync

Error adding task to job

I’m attempting to add a task to an existing job and get an error:“The job <job-name> contains an unlicensed connection: Only 10 tasks are allowed in the Job” I also tried creating a job from this existing job and got an error:The connection [Salesforce_abc] is unlicensed: Unlicensed connections cannot be shared across multiple jobs. We have an Enterprise license, and my job is using SalesForce as a source and Azure SQL as a destination. I tried adding a task to a different job that uses Salesforce as source and Azure SQL as destination, and it worked.

2
R
5 months ago
S
SatyendraApprentice
asked in CData Sync

Issue with CDATA Sync Job Using Incremental Replication Despite Removal

Hello CDATA Community,I hope this message finds you well. I am currently facing an issue with the CDATA Sync tool and would appreciate any insights or assistance from the community.Problem Description: I have configured a job with a single task, where the source is Salesforce, and the destination is an SQL database. Initially, I ran the task without incremental replication, and it successfully synchronized all records for a specific Salesforce object. Later, I implemented incremental replication and verified that it worked as expected. However, when I decided to remove incremental replication and attempted to sync the data again, the job seems to persist in using incremental replication, and not all data is being synchronized. Steps Performed:Created a job with Salesforce as the source and SQL database as the destination. Ran the task without incremental replication, successfully syncing all records. Implemented incremental replication and verified its functionality. Removed incrementa

3
Ankit Singh
5 months ago
Virtual Event: Data Virtualization, Reimagined Ma”arch 14, 2024 style=

Badge winners

  • Product Expert
    cdata_userhas earned the badge Product Expert
  • Product Expert
    Tapan18118has earned the badge Product Expert
  • Product Expert
    mja311has earned the badge Product Expert
  • Product Expert
    jussihihas earned the badge Product Expert
  • Product Expert
    TonyLhas earned the badge Product Expert
Show all badges
Terms and ConditionsCookie settings